Window Replacement in Central CT
Replacement windows for Connecticut homes, one fogged double-hung or every opening in the house. Measured, ordered, and installed by our own crew.
Replacement Windows Built for Connecticut Weather
Old windows are where a Connecticut house loses heat in winter and lets it in all summer. Magee Homes replaces windows for homeowners in East Hampton, CT and across central Connecticut, and every window is measured to its opening and installed by our own team.
We replace double-hung and single-hung windows, casements and awnings, and bay, bow, picture, and specialty shapes. Some homeowners start with the few windows that bother them most. Others do the whole house at once.
The difference shows up right away: no drafts, less outside noise, steadier temperatures from room to room, and lower heating and cooling bills. New windows also change how the house looks from the street.
Window and Door Replacement Services
Every window and door type we install, each with its own page covering styles, materials, and what the installation involves.
Double-Hung & Single-Hung Windows
The window on most colonials, capes, and ranches in central Connecticut, replaced as insert or full-frame units in vinyl, fiberglass, or wood-clad. Tilt-in sashes and glass that stays clear.
Double-Hung Window Replacement →
Casement & Awning Windows
Crank-out windows that close against a full-perimeter gasket. Good over kitchen sinks, in baths, and in hard-to-reach openings. We replace worn units and convert double-hung openings to casement.
Casement & Awning Windows →
Bay, Bow & Specialty Windows
Bay and bow windows replaced, or added to a flat wall with the framing, support, cap, and insulation planned in. Also picture, arched, and geometric fixed windows.
Bay, Bow & Specialty Windows →
Entry Doors
Fiberglass and steel entry doors with sidelights and transoms, set on a rebuilt sill when the old one has rotted, then adjusted to latch and seal on all four sides.
Entry Door Replacement →
Patio & Sliding Glass Doors
Sliding, hinged French, sliding French, and multi-panel doors set over a sill pan. Subfloor and framing get checked first and rebuilt where the old door let water in.
Patio Door Replacement →
Storm Doors
Full-view, ventilating, and retractable-screen storm doors mounted on sound casing. We check the exposure and the entry door first so the storm door will not trap heat against it.
Storm Door Installation →Choosing Energy-Efficient Windows
Efficiency comes from the whole unit. Low-E glass reflects heat back into the room, gas-filled panes slow heat loss, and a tight frame closes against continuous weatherstripping. You get warmer glass in January and less condensation.
The frame material matters too:
- Vinyl: the most common choice. No painting, and it insulates well.
- Fiberglass: stable through temperature swings, takes paint, and allows slimmer frames.
- Wood-clad: real wood inside, a weather-resistant exterior outside.
Windows for Older and Historic Homes
Plenty of houses around East Hampton still have their original windows, along with trim and grille patterns worth keeping. We match the sightlines your house was built with and recommend one of two approaches, based on the condition of each frame:
- Insert replacement, which keeps your original interior trim when the frame is sound.
- Full-frame replacement, down to the rough opening, when it is not.
How Magee Homes Handles Your Window and Door Replacement
In-Home Assessment and Consultation
We walk the house with you, look at each window and door, and measure every opening. You tell us what matters most: drafts, looks, or budget. The estimate is built from those measurements.
Product Selection and Recommendations
We put frame materials, glass packages, warranties, and styles side by side and recommend what suits each opening. You see the options in your own house, next to the windows they will replace.
Professional Removal and Installation
Old units come out, each opening is prepped, and the new window or door is set level and square. We insulate and flash the perimeter, then finish the trim inside and out.
Final Inspection and Walkthrough
We open, close, and lock every unit, check the seals, and look over the finish work. Then we walk the job with you. We leave when it is right and you are satisfied.
Why Connecticut Homeowners Trust Magee Homes for Window and Door Replacement
Precision Measurement and Fit
Every window and door is measured to its opening before it is ordered. A tight fit means no gaps, full insulation, and a unit that works right from day one.
Licensed & Fully Insured
Magee Homes is a registered Connecticut Home Improvement Contractor, HIC.0671935, with liability coverage on every job. Your installation is covered the way the state requires.
Clear Communication, No Surprises
You get a written scope before work starts and a straight answer when you call. If we find rot behind a sill, you hear about it before we go further.
Premium Products, Expert Craftsmanship
A well-made window still leaks if it is set badly. We install solid frames and quality glass, then take the time on each opening so the unit lasts decades.
What Our Clients Are Saying
Our best referrals come from homeowners who have been through the remodeling process with us. Here’s what they have to say about working with the Magee Homes team.
Window and Door Replacement Questions
Get answers to the most common questions we hear from Connecticut homeowners about window and door replacement. If you still have questions, give us a call or fill out our contact form.
Fogging between panes, drafts at closed windows, sashes that stick or will not stay up, peeling or rotting frames, and heating bills that keep climbing. Windows past 15 to 20 years are usually well behind modern units. Any one of these is reason to have them looked at.
Vinyl is the most common choice. It needs no painting and insulates well. Fiberglass is stronger and allows a slimmer frame with more glass. Wood and wood-clad give a traditional look inside with modern performance behind it. There is no single best; we compare them against your house.
It depends on how many openings we are replacing and what we find once the old units come out. Rotted sills or framing get rebuilt before anything new goes in. We give you a written schedule before work starts.
Like-for-like replacement in the same opening usually does not need a permit. Changing the size of an opening or adding a new one usually does. We handle the permit when one applies and build to the local code either way.
Federal and utility incentives change from year to year, so check what is available when you are ready to buy. Every window and door we quote comes with its energy performance ratings so you can confirm eligibility for any current program.